LTE Specifications
| Operating Band | Cat M1: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85 Cat NB2: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85 |
| Data Transmission | eMTC (DL) 375 Kbps eMTC (UL) 375 Kbps NB2 (DL) 127 Kbps NB2 (UL) 158.5 Kbps NB1 (DL) 32 Kbps NB1 (UL) 70 Kbps |
EGPRS Specifications
| Frequency | EGPRS 850 / 900 / 1800 / 1900 MHz |
| Data Transmission | GPRS: (DL) 107Kbps, (UL) 85.6Kbps EDGE: (DL) 296Kbps, (UL) 236.8Kbps |
GNSS Specifications
| GNSS Type | u-blox All-in-One GNSS receiver |
| Sensitivity | Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.5m |
| TTFF (Open Sky) | Cold start: 27s average Warm start: 27s average Hot start: 1s average |
General Specifications
| Dimensions | 250 × 58 × 61mm
9.84’’(L) × 2.28’’(W) × 2.40’’(H) |
| Weight | 719g (25.36oz) |
| Internal Battery | 57000mAh, Lithium thionyl chloride battery |
| Standby Time | 1 report/ day : up to 10 years
6 reports/ day : up to 6 Years 5 minutes reporting: 3 months |
| Waterproof | IP68 compliant |
| Operating Temperature | -20 ~ +60 C |
| BLE | Support BLE 5.2 protocol |
| Internal Temperature Sensor | Built-in temperature sensor |
| Buffer Messages | Up to 10,000 buffer messages |
Interfaces
| Battery Switch | Used for power on/off (Internal only) |
| Cellular Antenna | Internal only |
| GNSS Antenna | Internal only |
| BLE Antenna | Internal only |
| WiFi Antenna | Internal only |
| LED Indicators | GNSS, Status (Internal only) |
| USB Type-C | Used for firmware upgrading and debug (Internal only) |
Air Interface Protocol
| Command Set | @Track protocol command |
| Transmit Protocol | TCP, UDP, SMS |
| Working Modes | Power saving mode for long standby time Continuous mode for emergency tracking |
| Scheduled Timing Report | Report position and status at preset time intervals |
| Geo-fences | Support up to 20 internal geo-fence regions |
| Low Power Alarm | Alarm when internal battery is low |
| Wakeup Report | Report when the device wakes up |
| Motion Detection | Motion detection based on internal 3-axis accelerometer |
| Reporting Frequency Adjustment | Intelligent adjustment of reporting frequency |
Please contact us:
info@skysmart-iot.de
Rottweil - Germany