GPS Tracker for Trailer Tracking with self-charging battery
Waterproof IP67 / LTE Cat M1/NB2 with 2G Fallback / BLE


This battery powered GPS Tracker was specially developed for use on trailers. The device works with LTE Cat M1/NB2 with 2G Fallback, has waterproof IP67 housing and support BLE. The SKYTL1600 is exactly the right solution for companies looking for a long-lasting, battery-powered but self-charging GPS Tracking solution for Trailer, Tanker and other non-self-driving vehicles.

The SKYTL1600 GPS Trailer Tracker can be powered by the local battery up to 120 days without charging. Over the PIN-Connector the tracker can be connected with the power-supply-network of the Trailer. As soon as the power supply is applied to the trailer via the truck, the battery is then automatically charged. It is an ideal solution for trailer tracking, as trailers are first transported by truck and then parked somewhere for several days or weeks without power supply. This solution enables constant trailer tracking.

The robust and compact design of the trailer tracker enables simple, flexible and quick installation. The waterproof IP67 housing ensures that the GPS Tracker for Trailer can be used without any problems even under very high requirements. Since the device also has a BLE interface, addition BLE Sensors like Temperature Sensor or Humidity Sensors can be supported and further parameters can be monitored. Over the serial interface further equipment’s like Fuel Level Sensor, Temperature Sensor etc. can also be connected. Try our GPS Tracker for Trailer Tracking with self-charging battery and convince yourselves.

Features of SKYTL1600:


Air Freight Tracking

LOCATION

Global Shipment Tracking with GPS coordinates. Check whenever you want to see where your Trailer is.

GPS Cargo Tracker mit Feuchtigkeitssensor

OUTDOOR IP67

The device has a waterproof IP67 housing and can easily be used in outdoor applications.

Air Freight Tracking mit Bewegungssensor

MOTION

Motion detection based on internal 3-axis accelerometer, intelligent adjustment of reporting frequency of trailer tracker.

Datenlogger Temperatur Luftfracht Air Cargo Freight

SENSORS

Over the serial inteface or via the BLE option further Sensors can be installed and monitored automatically by the trailer tracker.


Technical Specification:


LTE Specifications

Operating Band Cat M1/Cat NB1:
LTE-FDD: B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/ B19/ B20/ B25/ B28
Data Transmission eMTC (DL) 375 Kbps
eMTC (UL) 375 Kbps
NB1 (DL) 32 Kbps
NB1 (UL) 70 Kbps

EGPRS Specifications

Frequency EGPRS 850 / 900 / 1800 / 1900 MHz
Data Transmission GPRS multi-slot class 33 (33 by default)
EDGE multi-slot class 33 (33 by default)

GNSS Specifications

GNSS Type u-blox All-in-One GNSS receiver
Sensitivity Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy (CEP) Autonomous: < 2.5m
TTFF (Open Sky) Cold start: 27s average
Warm start: 27s average
Hot start: 1s average

General Specifications

Dimensions 138 × 66 × 38mm
5.43’’(L) × 2.60’’(W) × 1.50’’(H)
Weight 320g (11.29 oz)
Backup Battery Li-ion, 3.7V, 5800 mAh, 18650 battery pack
Internal G-sensor Used for speed alarm and motion alarm
Standby Time 120 days, report one location and online 15 minutes per day
Waterproof IP67
Operating Voltage DC 8V to 32V
Operating Temperature -30℃~+80℃
Charging Temperature 10℃~+45℃
Operating Humidity 0%~95% non-condensing
BLE Support BLE 4.2 protocol
Buffer Messages Up to 10,000 buffer messages

Interfaces

Digital Inputs 1 positive trigger input for ignition detection
Analog Input 1 analog input (0V-32V)
1-wire Interface Support 1-wire temperature sensor and iButton driver ID (maximum 8 channels)
Power Output 1 power output (3.3V) for external devices
Digital Inputs/Outputs 4 negative trigger inputs for normal use, or 4 open drain outputs 150mA max drive current
Serial Port 1 RS232 port
1 TTL Port
Cellular Antenna Internal only
GNSS Antenna Internal only
BLE Antenna Internal only
LED Indicators CEL, GNSS, PWR
Connector 18 pin waterproof connector

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences Geo-fence alarm and parking alarm based on up to 20 preset geo-fence regions
Low Power Alarm Alarm when backup battery is almost exhausted
Power On Report Report when the device is powered on
Special Alarm Special alarm based on digital/analog input
Remote Control OTA control of digital outputs


CONTACT

Please contact us:

info@skysmart-iot.de

Rottweil - Germany